FlameGuard® Non-Combustible Cladding & Fire Rated Walls

FlameGuard® is a non-combustible and fire-rated walling product with a non-ozone depleting Mineral Wool core, encased in BlueScope® Steel pre-finished in Colorbond®.

FlameGuard® has been tested & certified to achieve up to a 3 Hour Fire Rating, also offering a range of cost-effective FlameGuard® wall configurations that can achieve project specific FRL requirements of 60/60/60, 90/90/90 or 120/120/120 in addition to the 180/180/180 (3 hours).

The FlameGuard® wall system not only has high thermal performance & energy efficiency but is fire-resistant walling panel made from pre-finished Australian-made Bluescope® Colorbond® steel and is well suited to long spanning applications which require Non-Combustibility, FRL or FM Approval for insurance purposes. FlameGuard® 50mm & 75mm are FM Approved to FM 4880 No Height Restriction. FlameGuard®Plus 100mm & 150mm are FM Approved to FM 4880 & FM 4881 No Height Restriction  and is recommended where improved fire performance is required for insurance purposes in walling and ceiling applications.

^ Note: Please check COLORBOND® colour availability with your local Bondor representative prior to specification as project min order quantities may apply.